diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/pnp.h | 12 | ||||
| -rw-r--r-- | include/linux/serial_8250.h | 4 | ||||
| -rw-r--r-- | include/linux/serial_core.h | 22 | ||||
| -rw-r--r-- | include/linux/serial_s3c.h | 28 | ||||
| -rw-r--r-- | include/linux/tty.h | 25 | ||||
| -rw-r--r-- | include/linux/vt_buffer.h | 4 | ||||
| -rw-r--r-- | include/uapi/linux/serial_core.h | 12 | ||||
| -rw-r--r-- | include/uapi/linux/serial_reg.h | 3 |
8 files changed, 98 insertions, 12 deletions
diff --git a/include/linux/pnp.h b/include/linux/pnp.h index 195aafc6cd0..6512e9cbc6d 100644 --- a/include/linux/pnp.h +++ b/include/linux/pnp.h @@ -12,6 +12,7 @@ #include <linux/list.h> #include <linux/errno.h> #include <linux/mod_devicetable.h> +#include <linux/console.h> #define PNP_NAME_LEN 50 @@ -309,15 +310,22 @@ struct pnp_fixup { #define PNP_DISABLE 0x0004 #define PNP_CONFIGURABLE 0x0008 #define PNP_REMOVABLE 0x0010 +#define PNP_CONSOLE 0x0020 #define pnp_can_read(dev) (((dev)->protocol->get) && \ ((dev)->capabilities & PNP_READ)) #define pnp_can_write(dev) (((dev)->protocol->set) && \ ((dev)->capabilities & PNP_WRITE)) -#define pnp_can_disable(dev) (((dev)->protocol->disable) && \ - ((dev)->capabilities & PNP_DISABLE)) +#define pnp_can_disable(dev) (((dev)->protocol->disable) && \ + ((dev)->capabilities & PNP_DISABLE) && \ + (!((dev)->capabilities & PNP_CONSOLE) || \ + console_suspend_enabled)) #define pnp_can_configure(dev) ((!(dev)->active) && \ ((dev)->capabilities & PNP_CONFIGURABLE)) +#define pnp_can_suspend(dev) (((dev)->protocol->suspend) && \ + (!((dev)->capabilities & PNP_CONSOLE) || \ + console_suspend_enabled)) + #ifdef CONFIG_ISAPNP extern struct pnp_protocol isapnp_protocol; diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index e02acf0a0ec..a8efa235b7c 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -85,6 +85,9 @@ struct uart_8250_port { unsigned char mcr_force; /* mask of forced bits */ unsigned char cur_iotype; /* Running I/O type */ unsigned int rpm_tx_active; + unsigned char canary; /* non-zero during system sleep + * if no_console_suspend + */ /* * Some bits in registers are cleared on a read, so they must @@ -126,6 +129,7 @@ extern int serial8250_do_startup(struct uart_port *port); extern void serial8250_do_shutdown(struct uart_port *port); extern void serial8250_do_pm(struct uart_port *port, unsigned int state, unsigned int oldstate); +extern void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl); extern int fsl8250_handle_irq(struct uart_port *port); int serial8250_handle_irq(struct uart_port *port, unsigned int iir); unsigned char serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 057038cf278..baf3e1d0841 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -123,6 +123,7 @@ struct uart_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + void (*set_mctrl)(struct uart_port *, unsigned int); int (*startup)(struct uart_port *port); void (*shutdown)(struct uart_port *port); void (*throttle)(struct uart_port *port); @@ -190,8 +191,10 @@ struct uart_port { #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) #define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) -/* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ -#define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) +/* Port has hardware-assisted h/w flow control */ +#define UPF_AUTO_CTS ((__force upf_t) (1 << 20)) +#define UPF_AUTO_RTS ((__force upf_t) (1 << 21)) +#define UPF_HARD_FLOW ((__force upf_t) (UPF_AUTO_CTS | UPF_AUTO_RTS)) /* Port has hardware-assisted s/w flow control */ #define UPF_SOFT_FLOW ((__force upf_t) (1 << 22)) #define UPF_CONS_FLOW ((__force upf_t) (1 << 23)) @@ -213,11 +216,17 @@ struct uart_port { #error Change mask not equivalent to userspace-visible bit defines #endif - /* status must be updated while holding port lock */ + /* + * Must hold termios_rwsem, port mutex and port lock to change; + * can hold any one lock to read. + */ upstat_t status; #define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0)) #define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1)) +#define UPSTAT_AUTORTS ((__force upstat_t) (1 << 2)) +#define UPSTAT_AUTOCTS ((__force upstat_t) (1 << 3)) +#define UPSTAT_AUTOXOFF ((__force upstat_t) (1 << 4)) int hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ @@ -391,6 +400,13 @@ static inline bool uart_cts_enabled(struct uart_port *uport) return !!(uport->status & UPSTAT_CTS_ENABLE); } +static inline bool uart_softcts_mode(struct uart_port *uport) +{ + upstat_t mask = UPSTAT_CTS_ENABLE | UPSTAT_AUTOCTS; + + return ((uport->status & mask) == UPSTAT_CTS_ENABLE); +} + /* * The following are helper functions for the low level drivers. */ diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h index e6fc9567690..a7f004a3c17 100644 --- a/include/linux/serial_s3c.h +++ b/include/linux/serial_s3c.h @@ -104,6 +104,31 @@ S3C2410_UCON_RXIRQMODE | \ S3C2410_UCON_RXFIFO_TOI) +#define S3C64XX_UCON_TXBURST_1 (0<<20) +#define S3C64XX_UCON_TXBURST_4 (1<<20) +#define S3C64XX_UCON_TXBURST_8 (2<<20) +#define S3C64XX_UCON_TXBURST_16 (3<<20) +#define S3C64XX_UCON_TXBURST_MASK (0xf<<20) +#define S3C64XX_UCON_RXBURST_1 (0<<16) +#define S3C64XX_UCON_RXBURST_4 (1<<16) +#define S3C64XX_UCON_RXBURST_8 (2<<16) +#define S3C64XX_UCON_RXBURST_16 (3<<16) +#define S3C64XX_UCON_RXBURST_MASK (0xf<<16) +#define S3C64XX_UCON_TIMEOUT_SHIFT (12) +#define S3C64XX_UCON_TIMEOUT_MASK (0xf<<12) +#define S3C64XX_UCON_EMPTYINT_EN (1<<11) +#define S3C64XX_UCON_DMASUS_EN (1<<10) +#define S3C64XX_UCON_TXINT_LEVEL (1<<9) +#define S3C64XX_UCON_RXINT_LEVEL (1<<8) +#define S3C64XX_UCON_TIMEOUT_EN (1<<7) +#define S3C64XX_UCON_ERRINT_EN (1<<6) +#define S3C64XX_UCON_TXMODE_DMA (2<<2) +#define S3C64XX_UCON_TXMODE_CPU (1<<2) +#define S3C64XX_UCON_TXMODE_MASK (3<<2) +#define S3C64XX_UCON_RXMODE_DMA (2<<0) +#define S3C64XX_UCON_RXMODE_CPU (1<<0) +#define S3C64XX_UCON_RXMODE_MASK (3<<0) + #define S3C2410_UFCON_FIFOMODE (1<<0) #define S3C2410_UFCON_TXTRIG0 (0<<6) #define S3C2410_UFCON_RXTRIG8 (1<<4) @@ -155,6 +180,7 @@ #define S3C2440_UFSTAT_TXMASK (63<<8) #define S3C2440_UFSTAT_RXMASK (63) +#define S3C2410_UTRSTAT_TIMEOUT (1<<3) #define S3C2410_UTRSTAT_TXE (1<<2) #define S3C2410_UTRSTAT_TXFE (1<<1) #define S3C2410_UTRSTAT_RXDR (1<<0) @@ -179,8 +205,10 @@ #define S3C64XX_UINTM 0x38 #define S3C64XX_UINTM_RXD (0) +#define S3C64XX_UINTM_ERROR (1) #define S3C64XX_UINTM_TXD (2) #define S3C64XX_UINTM_RXD_MSK (1 << S3C64XX_UINTM_RXD) +#define S3C64XX_UINTM_ERR_MSK (1 << S3C64XX_UINTM_ERROR) #define S3C64XX_UINTM_TXD_MSK (1 << S3C64XX_UINTM_TXD) /* Following are specific to S5PV210 */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 7d66ae508e5..358a337af59 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -14,6 +14,29 @@ #include <linux/llist.h> +/* + * Lock subclasses for tty locks + * + * TTY_LOCK_NORMAL is for normal ttys and master ptys. + * TTY_LOCK_SLAVE is for slave ptys only. + * + * Lock subclasses are necessary for handling nested locking with pty pairs. + * tty locks which use nested locking: + * + * legacy_mutex - Nested tty locks are necessary for releasing pty pairs. + * The stable lock order is master pty first, then slave pty. + * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem. + * Subclassing this lock enables the slave pty to hold its + * termios_rwsem when claiming the master tty_buffer lock. + * tty_buffer lock - slave ptys can claim nested buffer lock when handling + * signal chars. The stable lock order is slave pty, then + * master. + */ + +enum { + TTY_LOCK_NORMAL = 0, + TTY_LOCK_SLAVE, +}; /* * (Note: the *_driver.minor_start values 1, 64, 128, 192 are @@ -443,6 +466,7 @@ extern void tty_flush_to_ldisc(struct tty_struct *tty); extern void tty_buffer_free_all(struct tty_port *port); extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld); extern void tty_buffer_init(struct tty_port *port); +extern void tty_buffer_set_lock_subclass(struct tty_port *port); extern speed_t tty_termios_baud_rate(struct ktermios *termios); extern speed_t tty_termios_input_baud_rate(struct ktermios *termios); extern void tty_termios_encode_baud_rate(struct ktermios *termios, @@ -467,7 +491,6 @@ static inline speed_t tty_get_baud_rate(struct tty_struct *tty) extern void tty_termios_copy_hw(struct ktermios *new, struct ktermios *old); extern int tty_termios_hw_change(struct ktermios *a, struct ktermios *b); -extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt); extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *); extern void tty_ldisc_deref(struct tty_ldisc *); diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h index 057db7d2f44..f38c10ba3ff 100644 --- a/include/linux/vt_buffer.h +++ b/include/linux/vt_buffer.h @@ -21,10 +21,6 @@ #ifndef VT_BUF_HAVE_RW #define scr_writew(val, addr) (*(addr) = (val)) #define scr_readw(addr) (*(addr)) -#define scr_memcpyw(d, s, c) memcpy(d, s, c) -#define scr_memmovew(d, s, c) memmove(d, s, c) -#define VT_BUF_HAVE_MEMCPYW -#define VT_BUF_HAVE_MEMMOVEW #endif #ifndef VT_BUF_HAVE_MEMSETW diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index c17218094f1..b2122813f18 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -55,7 +55,8 @@ #define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */ #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */ #define PORT_RT2880 29 /* Ralink RT2880 internal UART */ -#define PORT_MAX_8250 29 /* max port ID */ +#define PORT_16550A_FSL64 30 /* Freescale 16550 UART with 64 FIFOs */ +#define PORT_MAX_8250 30 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -248,4 +249,13 @@ /* MESON */ #define PORT_MESON 109 +/* Conexant Digicolor */ +#define PORT_DIGICOLOR 110 + +/* SPRD SERIAL */ +#define PORT_SPRD 111 + +/* Cris v10 / v32 SoC */ +#define PORT_CRIS 112 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 53af3b79012..00adb01fa5f 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -86,7 +86,8 @@ #define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ #define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ #define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ -#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ +#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750 and + some Freescale UARTs) */ #define UART_FCR_R_TRIG_SHIFT 6 #define UART_FCR_R_TRIG_BITS(x) \ |