1 files changed, 93 insertions, 172 deletions

diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c
index bf08282d5ee..622b60238a8 100644
--- a/sound/soc/codecs/wm8903.c
+++ b/sound/soc/codecs/wm8903.c
@@ -213,10 +213,11 @@ static u16 wm8903_reg_defaults[] = {
 };
 
 struct wm8903_priv {
-	struct snd_soc_codec codec;
+
 	u16 reg_cache[ARRAY_SIZE(wm8903_reg_defaults)];
 
 	int sysclk;
+	int irq;
 
 	/* Reference counts */
 	int class_w_users;
@@ -252,7 +253,6 @@ static int wm8903_volatile_register(unsigned int reg)
 static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
 {
 	u16 reg[5];
-	struct i2c_client *i2c = codec->control_data;
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 
 	BUG_ON(start > 48);
@@ -262,7 +262,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
 	snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0,
 		      reg[0] | WM8903_WSEQ_ENA);
 
-	dev_dbg(&i2c->dev, "Starting sequence at %d\n", start);
+	dev_dbg(codec->dev, "Starting sequence at %d\n", start);
 
 	snd_soc_write(codec, WM8903_WRITE_SEQUENCER_3,
 		     start | WM8903_WSEQ_START);
@@ -277,7 +277,7 @@ static int wm8903_run_sequence(struct snd_soc_codec *codec, unsigned int start)
 		reg[4] = snd_soc_read(codec, WM8903_WRITE_SEQUENCER_4);
 	} while (reg[4] & WM8903_WSEQ_BUSY);
 
-	dev_dbg(&i2c->dev, "Sequence complete\n");
+	dev_dbg(codec->dev, "Sequence complete\n");
 
 	/* Disable the sequencer again if we enabled it */
 	snd_soc_write(codec, WM8903_WRITE_SEQUENCER_0, reg[0]);
@@ -422,7 +422,6 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
 	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
 	struct snd_soc_codec *codec = widget->codec;
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
-	struct i2c_client *i2c = codec->control_data;
 	u16 reg;
 	int ret;
 
@@ -431,7 +430,7 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
 	/* Turn it off if we're about to enable bypass */
 	if (ucontrol->value.integer.value[0]) {
 		if (wm8903->class_w_users == 0) {
-			dev_dbg(&i2c->dev, "Disabling Class W\n");
+			dev_dbg(codec->dev, "Disabling Class W\n");
 			snd_soc_write(codec, WM8903_CLASS_W_0, reg &
 				     ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
 		}
@@ -444,14 +443,14 @@ static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
 	/* If we've just disabled the last bypass path turn Class W on */
 	if (!ucontrol->value.integer.value[0]) {
 		if (wm8903->class_w_users == 1) {
-			dev_dbg(&i2c->dev, "Enabling Class W\n");
+			dev_dbg(codec->dev, "Enabling Class W\n");
 			snd_soc_write(codec, WM8903_CLASS_W_0, reg |
 				     WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
 		}
 		wm8903->class_w_users--;
 	}
 
-	dev_dbg(&i2c->dev, "Bypass use count now %d\n",
+	dev_dbg(codec->dev, "Bypass use count now %d\n",
 		wm8903->class_w_users);
 
 	return ret;
@@ -935,7 +934,6 @@ static int wm8903_add_widgets(struct snd_soc_codec *codec)
 static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
-	struct i2c_client *i2c = codec->control_data;
 	u16 reg, reg2;
 
 	switch (level) {
@@ -974,7 +972,7 @@ static int wm8903_set_bias_level(struct snd_soc_codec *codec,
 			/* By default no bypass paths are enabled so
 			 * enable Class W support.
 			 */
-			dev_dbg(&i2c->dev, "Enabling Class W\n");
+			dev_dbg(codec->dev, "Enabling Class W\n");
 			snd_soc_write(codec, WM8903_CLASS_W_0, reg |
 				     WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
 		}
@@ -1228,10 +1226,8 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
 			  struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = rtd->codec;
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
-	struct i2c_client *i2c = codec->control_data;
 	struct snd_pcm_runtime *master_runtime;
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -1245,7 +1241,7 @@ static int wm8903_startup(struct snd_pcm_substream *substream,
 	if (wm8903->master_substream) {
 		master_runtime = wm8903->master_substream->runtime;
 
-		dev_dbg(&i2c->dev, "Constraining to %d bits\n",
+		dev_dbg(codec->dev, "Constraining to %d bits\n",
 			master_runtime->sample_bits);
 
 		snd_pcm_hw_constraint_minmax(substream->runtime,
@@ -1264,8 +1260,7 @@ static void wm8903_shutdown(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec = rtd->codec;
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
@@ -1284,10 +1279,8 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct snd_soc_device *socdev = rtd->socdev;
-	struct snd_soc_codec *codec = socdev->card->codec;
+	struct snd_soc_codec *codec =rtd->codec;
 	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
-	struct i2c_client *i2c = codec->control_data;
 	int fs = params_rate(params);
 	int bclk;
 	int bclk_div;
@@ -1306,7 +1299,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 	u16 dac_digital1 = snd_soc_read(codec, WM8903_DAC_DIGITAL_1);
 
 	if (substream == wm8903->slave_substream) {
-		dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+		dev_dbg(codec->dev, "Ignoring hw_params for slave substream\n");
 		return 0;
 	}
 
@@ -1332,7 +1325,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 		switch (sample_rates[dsp_config].rate) {
 		case 88200:
 		case 96000:
-			dev_err(&i2c->dev, "%dHz unsupported by ADC\n",
+			dev_err(codec->dev, "%dHz unsupported by ADC\n",
 				fs);
 			return -EINVAL;
 
@@ -1340,7 +1333,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 			break;
 		}
 
-	dev_dbg(&i2c->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
+	dev_dbg(codec->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
 	clock1 &= ~WM8903_SAMPLE_RATE_MASK;
 	clock1 |= sample_rates[dsp_config].value;
 
@@ -1366,7 +1359,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
-	dev_dbg(&i2c->dev, "MCLK = %dHz, target sample rate = %dHz\n",
+	dev_dbg(codec->dev, "MCLK = %dHz, target sample rate = %dHz\n",
 		wm8903->sysclk, fs);
 
 	/* We may not have an MCLK which allows us to generate exactly
@@ -1401,12 +1394,12 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 	clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
 	clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
 
-	dev_dbg(&i2c->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
+	dev_dbg(codec->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
 		clk_sys_ratios[clk_config].rate,
 		clk_sys_ratios[clk_config].mode,
 		clk_sys_ratios[clk_config].div);
 
-	dev_dbg(&i2c->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
+	dev_dbg(codec->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
 
 	/* We may not get quite the right frequency if using
 	 * approximate clocks so look for the closest match that is
@@ -1428,7 +1421,7 @@ static int wm8903_hw_params(struct snd_pcm_substream *substream,
 	aif2 &= ~WM8903_BCLK_DIV_MASK;
 	aif3 &= ~WM8903_LRCLK_RATE_MASK;
 
-	dev_dbg(&i2c->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
+	dev_dbg(codec->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
 		bclk_divs[bclk_div].ratio / 10, bclk,
 		(clk_sys * 10) / bclk_divs[bclk_div].ratio);
 
@@ -1504,8 +1497,8 @@ EXPORT_SYMBOL_GPL(wm8903_mic_detect);
 
 static irqreturn_t wm8903_irq(int irq, void *data)
 {
-	struct wm8903_priv *wm8903 = data;
-	struct snd_soc_codec *codec = &wm8903->codec;
+	struct snd_soc_codec *codec = data;
+	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 	int mic_report;
 	int int_pol;
 	int int_val = 0;
@@ -1586,8 +1579,8 @@ static struct snd_soc_dai_ops wm8903_dai_ops = {
 	.set_sysclk	= wm8903_set_dai_sysclk,
 };
 
-struct snd_soc_dai wm8903_dai = {
-	.name = "WM8903",
+static struct snd_soc_dai_driver wm8903_dai = {
+	.name = "wm8903-hifi",
 	.playback = {
 		.stream_name = "Playback",
 		.channels_min = 2,
@@ -1605,23 +1598,16 @@ struct snd_soc_dai wm8903_dai = {
 	.ops = &wm8903_dai_ops,
 	.symmetric_rates = 1,
 };
-EXPORT_SYMBOL_GPL(wm8903_dai);
 
-static int wm8903_suspend(struct platform_device *pdev, pm_message_t state)
+static int wm8903_suspend(struct snd_soc_codec *codec, pm_message_t state)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
 	wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
 	return 0;
 }
 
-static int wm8903_resume(struct platform_device *pdev)
+static int wm8903_resume(struct snd_soc_codec *codec)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-	struct i2c_client *i2c = codec->control_data;
 	int i;
 	u16 *reg_cache = codec->reg_cache;
 	u16 *tmp_cache = kmemdup(reg_cache, sizeof(wm8903_reg_defaults),
@@ -1637,65 +1623,37 @@ static int wm8903_resume(struct platform_device *pdev)
 				snd_soc_write(codec, i, tmp_cache[i]);
 		kfree(tmp_cache);
 	} else {
-		dev_err(&i2c->dev, "Failed to allocate temporary cache\n");
+		dev_err(codec->dev, "Failed to allocate temporary cache\n");
 	}
 
 	return 0;
 }
 
-static struct snd_soc_codec *wm8903_codec;
-
-static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
-				      const struct i2c_device_id *id)
+static int wm8903_probe(struct snd_soc_codec *codec)
 {
-	struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
-	struct wm8903_priv *wm8903;
-	struct snd_soc_codec *codec;
+	struct wm8903_platform_data *pdata = dev_get_platdata(codec->dev);
+	struct wm8903_priv *wm8903 = snd_soc_codec_get_drvdata(codec);
 	int ret, i;
 	int trigger, irq_pol;
 	u16 val;
 
-	wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
-	if (wm8903 == NULL)
-		return -ENOMEM;
-
-	codec = &wm8903->codec;
-
-	mutex_init(&codec->mutex);
-	INIT_LIST_HEAD(&codec->dapm_widgets);
-	INIT_LIST_HEAD(&codec->dapm_paths);
-
-	codec->dev = &i2c->dev;
-	codec->name = "WM8903";
-	codec->owner = THIS_MODULE;
-	codec->bias_level = SND_SOC_BIAS_OFF;
-	codec->set_bias_level = wm8903_set_bias_level;
-	codec->dai = &wm8903_dai;
-	codec->num_dai = 1;
-	codec->reg_cache_size = ARRAY_SIZE(wm8903->reg_cache);
-	codec->reg_cache = &wm8903->reg_cache[0];
-	snd_soc_codec_set_drvdata(codec, wm8903);
-	codec->volatile_register = wm8903_volatile_register;
 	init_completion(&wm8903->wseq);
 
-	i2c_set_clientdata(i2c, codec);
-	codec->control_data = i2c;
-
 	ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
 	if (ret != 0) {
-		dev_err(&i2c->dev, "Failed to set cache I/O: %d\n", ret);
-		goto err;
+		dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
+		return ret;
 	}
 
 	val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID);
 	if (val != wm8903_reg_defaults[WM8903_SW_RESET_AND_ID]) {
-		dev_err(&i2c->dev,
+		dev_err(codec->dev,
 			"Device with ID register %x is not a WM8903\n", val);
 		return -ENODEV;
 	}
 
 	val = snd_soc_read(codec, WM8903_REVISION_NUMBER);
-	dev_info(&i2c->dev, "WM8903 revision %d\n",
+	dev_info(codec->dev, "WM8903 revision %d\n",
 		 val & WM8903_CHIP_REV_MASK);
 
 	wm8903_reset(codec);
@@ -1721,7 +1679,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
 		wm8903->mic_delay = pdata->micdet_delay;
 	}
 	
-	if (i2c->irq) {
+	if (wm8903->irq) {
 		if (pdata && pdata->irq_active_low) {
 			trigger = IRQF_TRIGGER_LOW;
 			irq_pol = WM8903_IRQ_POL;
@@ -1733,13 +1691,13 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
 		snd_soc_update_bits(codec, WM8903_INTERRUPT_CONTROL,
 				    WM8903_IRQ_POL, irq_pol);
 		
-		ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
+		ret = request_threaded_irq(wm8903->irq, NULL, wm8903_irq,
 					   trigger | IRQF_ONESHOT,
-					   "wm8903", wm8903);
+					   "wm8903", codec);
 		if (ret != 0) {
-			dev_err(&i2c->dev, "Failed to request IRQ: %d\n",
+			dev_err(codec->dev, "Failed to request IRQ: %d\n",
 				ret);
-			goto err;
+			return ret;
 		}
 
 		/* Enable write sequencer interrupts */
@@ -1781,133 +1739,96 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
 	val |= WM8903_DAC_MUTEMODE;
 	snd_soc_write(codec, WM8903_DAC_DIGITAL_1, val);
 
-	wm8903_dai.dev = &i2c->dev;
-	wm8903_codec = codec;
-
-	ret = snd_soc_register_codec(codec);
-	if (ret != 0) {
-		dev_err(&i2c->dev, "Failed to register codec: %d\n", ret);
-		goto err_irq;
-	}
-
-	ret = snd_soc_register_dai(&wm8903_dai);
-	if (ret != 0) {
-		dev_err(&i2c->dev, "Failed to register DAI: %d\n", ret);
-		goto err_codec;
-	}
-
-	return ret;
+	snd_soc_add_controls(codec, wm8903_snd_controls,
+				ARRAY_SIZE(wm8903_snd_controls));
+	wm8903_add_widgets(codec);
 
-err_codec:
-	snd_soc_unregister_codec(codec);
-err_irq:
-	if (i2c->irq)
-		free_irq(i2c->irq, wm8903);
-err:
-	wm8903_codec = NULL;
-	kfree(wm8903);
 	return ret;
 }
 
-static __devexit int wm8903_i2c_remove(struct i2c_client *client)
+/* power down chip */
+static int wm8903_remove(struct snd_soc_codec *codec)
 {
-	struct snd_soc_codec *codec = i2c_get_clientdata(client);
-	struct wm8903_priv *priv = snd_soc_codec_get_drvdata(codec);
+	wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+	return 0;
+}
 
-	snd_soc_unregister_dai(&wm8903_dai);
-	snd_soc_unregister_codec(codec);
+static struct snd_soc_codec_driver soc_codec_dev_wm8903 = {
+	.probe =	wm8903_probe,
+	.remove =	wm8903_remove,
+	.suspend =	wm8903_suspend,
+	.resume =	wm8903_resume,
+	.set_bias_level = wm8903_set_bias_level,
+	.reg_cache_size = ARRAY_SIZE(wm8903_reg_defaults),
+	.reg_word_size = sizeof(u16),
+	.reg_cache_default = wm8903_reg_defaults,
+	.volatile_register = wm8903_volatile_register,
+};
 
-	wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static __devinit int wm8903_i2c_probe(struct i2c_client *i2c,
+				      const struct i2c_device_id *id)
+{
+	struct wm8903_priv *wm8903;
+	int ret;
 
-	if (client->irq)
-		free_irq(client->irq, priv);
+	wm8903 = kzalloc(sizeof(struct wm8903_priv), GFP_KERNEL);
+	if (wm8903 == NULL)
+		return -ENOMEM;
 
-	kfree(priv);
+	i2c_set_clientdata(i2c, wm8903);
+	wm8903->irq = i2c->irq;
 
-	wm8903_codec = NULL;
-	wm8903_dai.dev = NULL;
+	ret = snd_soc_register_codec(&i2c->dev,
+			&soc_codec_dev_wm8903, &wm8903_dai, 1);
+	if (ret < 0)
+		kfree(wm8903);
+	return ret;
+}
 
+static __devexit int wm8903_i2c_remove(struct i2c_client *client)
+{
+	snd_soc_unregister_codec(&client->dev);
+	kfree(i2c_get_clientdata(client));
 	return 0;
 }
 
-/* i2c codec control layer */
 static const struct i2c_device_id wm8903_i2c_id[] = {
-       { "wm8903", 0 },
-       { }
+	{ "wm8903", 0 },
+	{ }
 };
 MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
 
 static struct i2c_driver wm8903_i2c_driver = {
 	.driver = {
-		.name = "WM8903",
+		.name = "wm8903-codec",
 		.owner = THIS_MODULE,
 	},
-	.probe    = wm8903_i2c_probe,
-	.remove   = __devexit_p(wm8903_i2c_remove),
+	.probe =    wm8903_i2c_probe,
+	.remove =   __devexit_p(wm8903_i2c_remove),
 	.id_table = wm8903_i2c_id,
 };
+#endif
 
-static int wm8903_probe(struct platform_device *pdev)
+static int __init wm8903_modinit(void)
 {
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
 	int ret = 0;
-
-	if (!wm8903_codec) {
-		dev_err(&pdev->dev, "I2C device not yet probed\n");
-		goto err;
-	}
-
-	socdev->card->codec = wm8903_codec;
-
-	/* register pcms */
-	ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to create pcms\n");
-		goto err;
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+	ret = i2c_add_driver(&wm8903_i2c_driver);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to register wm8903 I2C driver: %d\n",
+		       ret);
 	}
-
-	snd_soc_add_controls(socdev->card->codec, wm8903_snd_controls,
-				ARRAY_SIZE(wm8903_snd_controls));
-	wm8903_add_widgets(socdev->card->codec);
-
+#endif
 	return ret;
-
-err:
-	return ret;
-}
-
-/* power down chip */
-static int wm8903_remove(struct platform_device *pdev)
-{
-	struct snd_soc_device *socdev = platform_get_drvdata(pdev);
-	struct snd_soc_codec *codec = socdev->card->codec;
-
-	if (codec->control_data)
-		wm8903_set_bias_level(codec, SND_SOC_BIAS_OFF);
-
-	snd_soc_free_pcms(socdev);
-	snd_soc_dapm_free(socdev);
-
-	return 0;
-}
-
-struct snd_soc_codec_device soc_codec_dev_wm8903 = {
-	.probe = 	wm8903_probe,
-	.remove = 	wm8903_remove,
-	.suspend = 	wm8903_suspend,
-	.resume =	wm8903_resume,
-};
-EXPORT_SYMBOL_GPL(soc_codec_dev_wm8903);
-
-static int __init wm8903_modinit(void)
-{
-	return i2c_add_driver(&wm8903_i2c_driver);
 }
 module_init(wm8903_modinit);
 
 static void __exit wm8903_exit(void)
 {
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
 	i2c_del_driver(&wm8903_i2c_driver);
+#endif
 }
 module_exit(wm8903_exit);