summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath5k
AgeCommit message (Collapse)Author
2009-04-22atheros: put atheros wireless drivers into ath/Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: use regulatory infrastructureBob Copeland
Make ath5k select the ath module and add in the hooks to make the eeprom regulatory hint and reg notifier take effect. Changes to attach.c Changes-licensed-under: ISC Changes to base.c Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: reduce exported channel listBob Copeland
Claiming every available 5 ghz channel has a couple of negative side-effects: scanning takes a long time, and the channel list overflows the available buffer space for netlink commands, resulting in: $ iw phy phy0 info command failed: No buffer space available (-105) This patch adds a modparam so people who want to see all the channels can do so by passing all_channels=1. By default users will see a smaller list of channels. This also halves scan time, from 10 seconds down to less than 5 when using world regulatory. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Reported-by: Simon Farnsworth <simon@farnz.org.uk> Tested-By: Simon Farnsworth <simon@farnz.org.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22ath5k: fix scanning in AR2424Pavel Roskin
AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-13drivers/net: replace BUG() with BUG_ON() if possibleAlexander Beregalov
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-27ath5k: properly drop packets from ops->txBob Copeland
We shouldn't return NETDEV_TX_BUSY from the TX callback, especially after we've mucked with the sk_buffs. Drop the packets and return NETDEV_TX_OK. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: warn and correct rate for unknown hw rate indexesBob Copeland
ath5k sets up a mapping table from the hardware rate index to the rate index used by mac80211; however, we have seen some received frames with incorrect rate indexes. Such frames normally get dropped with a warning in __ieee80211_rx(), but it doesn't include enough information to track down the error. This patch adds a warning to hw_to_driver_rix for any lookups that result in a rate index of -1, then returns a valid rate so the frame can be processed. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Support LED's on Acer Extensa 5620zTulio Magno Quites Machado Filho
Add vendor ID for Quanta Microsystems and update the led table with the reported device. Reported-by: Scott Barnes <nekoreeve@gmail.com> Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Add tx power calibration supportNick Kossifidis
* Add tx power calibration support * Add a few tx power limits * Hardcode default power to 12.5dB * Disable TPC for now v2: Address Jiri's comments Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: remove dummy PCI "retry timeout" fixBob Copeland
Remove the PCI retry timeout code, for all the same reasons that Luis Rodriguez removed it for ath9k. Changes-licensed-under: 3-Clause-BSD Cc: Luis Rodriguez <lrodriguez@atheros.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: disable MIB interruptsBob Copeland
The MIB interrupt fires whenever counters overflow; however without support for automatic noise immunity, we can sometimes get an interrupt storm. The get_stats() callback reads the counters anyway so we can disable the interrupt for now until ANI is implemented. This fixes the issue reported in http://bugzilla.kernel.org/show_bug.cgi?id=12647. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Convert chip specific calibration data to a generic formatNick Kossifidis
* Convert chip specific calibration data to a generic format common for all chips Note: We scale up power to be in 0.25dB units for all chips for compatibility with RF5112 v2: Address Bob's and Jiri's comments Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27ath5k: Choose the right initvals for RF2425Nick Kossifidis
* Fix a typo in initvals.c so that we use the RF2425 array for RF2425 and not RF2413 Note: This also fixes incorect pd gain overlap since RF2425 has different pd gain overlap from RF2413 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: update LED table with reported devicesBob Copeland
This patch adds support for Acer Ferrari 5000, and also specifies the subsystem device ids for previously reported e-machines e510 and Acer Aspire One A150. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: use a table for LED parametersBob Copeland
Put the device id-to-gpio mapping in a table to make it easier to add new devices. The list of supported devices is unchanged. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: extract LED code into a separate fileBob Copeland
Move LED code out of base.c for clarity. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: don't change mac in eeprom_read_mac on errorJiri Slaby
Do not touch mac parameter passed to ath5k_eeprom_read_mac unless we are sure we have correct address. I.e. when returning error, do not change it. While at it, use '= {}' compiler trick for memsetting mac_d. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-16ath5k: constify stuffJiri Slaby
Make some structures const to place them in .rodata, since we won't change them. Most important parts of objdump -h: - 0 .text 00011170 + 0 .text 00011140 - 5 .rodata 0000828e + 5 .rodata 0000895e - 13 .data 00000560 + 13 .data 00000110 - 14 .devinit.data 00000260 Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: Set TSF fixAlina Friedrichsen
The old code doesn't work correctly e.g. on newer chipsets like AR5418+AR2122 and AR5416+AR2133. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-05ath5k: fix hw rate index conditionJiri Slaby
Make sure we print out a warning when the index is out of bounds, i.e. even on hw_rix == AR5K_MAX_RATES. Also change to WARN and print text with the reported hw_rix. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: compute rts/cts duration after computing full pktlenBob Copeland
RTS and CTS-to-self duration needs to go after ICV len is considered. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: move beacon processing to a taskletBob Copeland
We currently send beacons directly from the interrupt routine. This can hold up interrupt processing in beaconing modes and makes the ISR somewhat more complex. Move it to a tasklet like rx and tx. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: use spin_lock_irqsave for beacon lockBob Copeland
ath5k_reset can be called from process context, which in turn can call ath5k_beacon_config which takes the sc->block spinlock. Since it can also be taken in hard irq context, use spin_lock_irqsave everywhere. This fixes a potential deadlock in adhoc mode. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: don't mask off interrupt bitsBob Copeland
Since interrupts are already masked by the hardware, there's no need to discard interrupt bits in the ISR itself. Also, in ath5k_beacon_config we mask off a couple of bits without locking, so doing this mask in software can lead to unhandled beacon timer and beacon miss interrupts. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Storage class should be before const qualifierTobias Klauser
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Don't call reset on config_interfaceNick Kossifidis
* We call reset too often and this can result various PHY problems. On config_interface we don't need to reset the whole device. TODO: Create a function hw_fast_reset that only resets the PCU (tx/rx stuff) and not the whole device so that we can use this for stuck beacons etc. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Disable BMISS interruptsNick Kossifidis
* Don't enable BMISS interrupts as we don't handle them yet Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update reset codeNick Kossifidis
* Update reset and sync with HALs * Clean up eeprom settings and tweaking of initvals and put them on separate functions * Set/Restore 32KHz ref clk operation * Add some more documentation TODO: Spur mitigation, tpc, half/quarter rate, compression etc v2: Address comments from Bob and Felix and fix RSSI threshold bug introduced on the first version of the patch Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update initvalsNick Kossifidis
* Update initvals to match legacy and Sam's HAL Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update RF Buffer handlingNick Kossifidis
* Use the new way to modify rf buffer and put some rf buffer documentation on rfbufer.h * Merge all rf regs functions to one * Sync with legacy HAL and Sam's HAL * Set gain_F settings so that gain_F optimization engine works on RF5111/RF5112 (note that both HALs only use step 0 for RF5111 and they don't use gain_F optimization for this chip, code is there but is never used) Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: Update gain_F calibration code and add documentationNick Kossifidis
* Update and cleanup rf gain optimization code * Add comments and refferences to docs and use sane function names * Use only step index on ath5k_gain, no need to have a pointer to the current step since we can determine te step from it's index, this also allows us to put all other structs on rfgain.h and cleanup ath5k.h a little * No need for ah_rfgain variable, we use ah_gain.g_state for everything * Tested on RF2112B chip but gain_F calibration is not yet done (we will finish this on the next patch where we'll rewrite rf-buffer handling) * Use initial rf gain settings for 2316 and 2317 SoCs introduced on a previous patch It seems big but it's mostly cleanup, very few functional changes have been made on phy.c Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-13ath5k: PHY code cleanupNick Kossifidis
* Clean up initial rf buffer settings (new file rfbufer.h) and introduce a new way to access specific rf registers (will use it later) * Clean up initial rf gain settings by moving them on a new file (rfgain.h) so we can later work on gain optimization functions * Update initial rf buffer settings and initial rf gain settings from HALs. This breaks things for now because our current dumps come from pre-configured rf buffer (regdumps already had the needed values set from binary HAL). Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09ath5k: properly free rx dma descriptorsFelix Fietkau
When freeing rx dma descriptors, use the right buffer size. Fixes kernel oopses on module unload on ixp4xx and most likely other platforms as well. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-01-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e1000/e1000_main.c
2009-01-29ath5k: fix locking in ath5k_configBob Copeland
ath5k_config updates the software context without taking sc->lock. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: support LED's on emachines E510 notebookTulio Magno Quites Machado Filho
Add vendor ID for AMBIT and use it to set the ath5k LED gpio. base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Tulio Magno Quites Machado Filho <tuliom@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: Generic TSF debuggingAlina Friedrichsen
This patch enables low-level driver independent debugging of the TSF and remove the driver specific things of ath5k and ath9k from the debugfs. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Read and write the TSF via debugfsAlina Friedrichsen
This patch updates the ath5k specific entry in the debugfs to read and reset the TSF value, to allowing write it, too. This makes debugging the IBSS handling of wifi drivers _much_ easier. Signed-off-by: Alina Friedrichsen <x-alina@gmx.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: honor the RTS/CTS bitsBob Copeland
The ath5k driver didn't use set_rts_threshold or use_cts_prot, and also didn't check the IEEE80211_TX_RC_USE_{RTS_CTS,CTS_PROTECT} RC flags. Tell the hardware about these so RTS/CTS will work, and so the device will work better in mixed b/g environments. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: use short preamble when possibleBob Copeland
ath5k previously ignored TX_RC_SHORT_PREAMBLE and did not use config->use_short_preamble, so the long preamble was always used for transmitted packets. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: remove unused led_off parameterBob Copeland
ath5k_softc->led_off hasn't been used since commit 3a078876caee9634dbb9b41e6269262e30e8b535, "convert LED code to use mac80211 triggers." Changes-licensed-under: 3-Clause-BSD Reported-by: Tobias Doerffel <tobias.doerffel@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: remove stop/start calls from within suspend/resumeBob Copeland
mac80211 now takes down interfaces automatically during suspend so doing it in the driver is unnecessary. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: notice a negative keytypeRoel Kluin
To notice a negative keytype Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: discard 11g caps if reported by an ar5211 eepromHelmut Schaa
At least one ar5211 card (GIGABYTE GN-WLMA101, 168c:0012 subsystem 1458:e800) reports itself as 11g capable which seems to be a bug in the eeprom. initvals.c assumes that ar5211 is only 11b capable and thus refuses to initialize this card. Hence this patch changes the probing for 11g capabilities to discard 11g capabilities for ar5211 cards which allows this specific card to work fine in 11b and 11a modes. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix bf->skb==NULL panic in ath5k_tasklet_rxBob Copeland
Under memory pressure, we may not be able to allocate a new skb for new packets. If the allocation fails, ath5k_tasklet_rx will exit but will leave a buffer in the list with a NULL skb, eventually triggering a BUG_ON. Extract the skb allocation from ath5k_rxbuf_setup() and change the tasklet to allocate the next skb before accepting a packet. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29mac80211: 802.11w - Use BIP (AES-128-CMAC)Jouni Malinen
Add mechanism for managing BIP keys (IGTK) and integrate BIP into the TX/RX paths. Signed-off-by: Jouni Malinen <j@w1.fi> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: Minor QCU updatesNick Kossifidis
* Sync qcu.c with legacy-hal * Add some more comments * Set QCU mask to save power (QCU mask controls which QCUs are attached to each DCU, we do a 1:1 mapping) TODO: Use max QCU from EEPROM, further sync with legacy-hal and sam's hal and a few more minor fixes. I think after this we are ready to implement WME on the driver part. Anyone interested ? Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29ath5k: fix off-by-one in gpio checksBob Copeland
Sanity checks against AR5K_NUM_GPIO were all broken. This doesn't currently cause any problems since we only use the first four gpios. Changes-licensed-under: ISC Reported-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-02 18:24:37 +0000