summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8996.c
AgeCommit message (Expand)Author
2012-06-11ASoC: wm8996: Mark the CODEC as cache only when powering off on bootMark Brown
2012-06-11ASoC: wm8996: Move reset before the initial regulator disableMark Brown
2012-06-11ASoC: wm8996: Remove spurious regulator_bulk_free()Mark Brown
2012-04-26ASoC: wm8996: Put the microphone biases into bypass mode when idleMark Brown
2012-03-14ASoC: wm8996: Add 44.1kHz supportMark Brown
2012-03-08ASoC: wm8996: Remove separate output stage enable stepMark Brown
2012-03-08ASoC: wm8996: Remove some volatile regisers from the defaults tableMark Brown
2012-02-29ASoC: wm8996: Remove stub register cacheMark Brown
2012-02-29ASoC: wm8996: Fix /RESET bounce orderingMark Brown
2012-02-21ASoC: wm8996: Convert to use DAPM routes for stream connectionsMark Brown
2012-02-21ASoC: wm8996: Implement DRC coefficient configurationMark Brown
2012-02-17ASoC: wm8996: Make sure we bounce /RESET to resetMark Brown
2012-02-17ASoC: wm8996: Convert to module_i2c_driver()Mark Brown
2012-02-15ASoC: Show device id in the debug messageAxel Lin
2012-02-09Merge tag 'v3.3-rc3' as we've got several bugfixes in there which areMark Brown
2012-02-04ASoC: core: Add support for DAI and machine kcontrols.Liam Girdwood
2012-02-01ASoC: wm8996: Use devm_regulator_bulk_get()Mark Brown
2012-02-01ASoC: wm8996: Switch to using common code for managing CPVDD supplyMark Brown
2012-02-01Merge tag 'v3.3-rc2' into for-3.4Mark Brown
2012-01-27ASoC: Set idle_bias_off flag in snd_soc_codec_driverAxel Lin
2012-01-26ASoC: wm8996: Handle failures to determine accessory polarityMark Brown
2012-01-25ASoC: wm8996: Mark register cache as dirty when regulators are disabledMark Brown
2012-01-22ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown
2012-01-20ASoC: 24 bits are significant on the WM8996 audio interfacesMark Brown
2012-01-20ASoC: Disable register synchronisation for low frequency WM8996 SYSCLKMark Brown
2011-12-30ASoC: Enable ASoC register map dump for some regmap CODECsMark Brown
2011-12-14ASoC: Tune the accessory detection rates for WM8996Mark Brown
2011-12-11Merge branch 'for-3.2' into for-3.3Mark Brown
2011-12-11ASoC: Fix WM8996 24.576MHz clock operationMark Brown
2011-11-27ASoC: Convert wm8996 to use devm_kzalloc()Mark Brown
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen
2011-11-08ASoC: Convert WM8996 gpiolib to regmapMark Brown
2011-11-08ASoC: Move most WM8996 resource acquisition to I2C probeMark Brown
2011-11-08ASoC: Convert WM8996 to direct regmap API usageMark Brown
2011-10-24ASoC: wm8996: Avoid a redundant i2c_get_clientdata call in wm8996_i2c_removeAxel Lin
2011-10-22ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2Axel Lin
2011-10-20ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 CaptureAxel Lin
2011-10-03ASoC: Remove needless codec->dapm.bias_level assignment to SND_SOC_BIAS_OFFAxel Lin
2011-09-27ASoC: Add DRC control for WM8996Karl Tsou
2011-09-20ASoC: Refcount WM8996 bandgap from FLL tooMark Brown
2011-09-20ASoC: Fix unused variable warning in WM8996Mark Brown
2011-09-19ASoC: Initial WM8996 headphone impedance measurement supportMark Brown
2011-09-19ASoC: WM8996 only needs bandgap for analogue functionalityMark Brown
2011-09-16ASoC: Fix WM8996 DC servo operation without IRQMark Brown
2011-09-14ASoC: Correct channel numbers for WM8996 AIF2Mark Brown
2011-09-14ASoC: Disable WM8996 CPVDD supply when not in useMark Brown
2011-09-05ASoC: Check that WM8996 FLL started even if we don't have the IRQMark Brown
2011-08-29ASoC: Add 3D stereo support for wm8996susan gao
2011-08-24Merge branch 'for-3.1' into for-3.2Mark Brown
2011-08-24ASoC: Correct element count for WM8996 sidetone HPFMark Brown