blob: 1ef8228db73b605db61a4e654460609bcb3bc7b5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
|
ST STiH407 USB PHY controller
This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
Required properties:
- compatible : should be "st,stih407-usb2-phy"
- reg : contain the offset and length of the system configuration registers
used as glue logic to control & parameter phy
- reg-names : the names of the system configuration registers in "reg", should be "param" and "reg"
- st,syscfg : sysconfig register to manage phy parameter at driver level
- resets : list of phandle and reset specifier pairs. There should be two entries, one
for the whole phy and one for the port
- reset-names : list of reset signal names. Should be "global" and "port"
See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
See: Documentation/devicetree/bindings/reset/reset.txt
Example:
usb2_picophy0: usbpicophy@f8 {
compatible = "st,stih407-usb2-phy";
reg = <0xf8 0x04>, /* syscfg 5062 */
<0xf4 0x04>; /* syscfg 5061 */
reg-names = "param", "ctrl";
#phy-cells = <0>;
st,syscfg = <&syscfg_core>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
};
|
