1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
|
/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
#include <mach/map.h>
#include "common.h"
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPX2(5),
.ext_cd_gpio_invert = 1,
.max_width = 4,
};
static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
.max_width = 4,
};
static void __init armlex4210_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
}
static void __init armlex4210_wlan_init(void)
{
/* enable */
s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
/* reset */
s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
/* wakeup */
s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
}
static struct resource armlex4210_smsc911x_resources[] = {
[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
[1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
| IRQF_TRIGGER_HIGH),
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device armlex4210_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
.resource = armlex4210_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static struct platform_device *armlex4210_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
&armlex4210_smsc911x,
&exynos4_device_ahci,
};
static void __init armlex4210_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5P_SROM_BW) &
~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
(0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
S5P_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5P_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
(0x9 << S5P_SROM_BCX__TACP__SHIFT) |
(0xc << S5P_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5P_SROM_BCX__TACC__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
static void __init armlex4210_map_io(void)
{
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
static void __init armlex4210_machine_init(void)
{
armlex4210_smsc911x_init();
armlex4210_sdhci_init();
armlex4210_wlan_init();
platform_add_devices(armlex4210_devices,
ARRAY_SIZE(armlex4210_devices));
}
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.atag_offset = 0x100,
.smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.init_late = exynos_init_late,
.timer = &exynos4_timer,
.restart = exynos4_restart,
MACHINE_END
|
