1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
|
/*
* Manroland mucmc52 board Device Tree Source
*
* Copyright (C) 2009 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
* Copyright 2006-2007 Secret Lab Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "mpc5200b.dtsi"
/ {
model = "manroland,mucmc52";
compatible = "manroland,mucmc52";
soc5200@f0000000 {
gpt0: timer@600 { // GPT 0 in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
gpio-controller;
#gpio-cells = <2>;
};
timer@640 {
status = "disabled";
};
timer@650 {
status = "disabled";
};
timer@660 {
status = "disabled";
};
timer@670 {
status = "disabled";
};
rtc@800 {
status = "disabled";
};
can@900 {
status = "disabled";
};
can@980 {
status = "disabled";
};
spi@f00 {
status = "disabled";
};
usb@1000 {
status = "disabled";
};
psc@2000 { // PSC1
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
psc@2200 { // PSC2
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
psc@2400 { // PSC3
status = "disabled";
};
psc@2600 { // PSC4
status = "disabled";
};
psc@2800 { // PSC5
status = "disabled";
};
psc@2c00 { // PSC6
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
};
ethernet@3000 {
phy-handle = <&phy0>;
};
mdio@3000 {
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
i2c@3d00 {
status = "disabled";
};
i2c@3d40 {
hwmon@2c {
compatible = "ad,adm9240";
reg = <0x2c>;
};
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
pci@f0000d00 {
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
0x8000 0 0 1 &mpc5200_pic 0 3 3
0x8000 0 0 2 &mpc5200_pic 0 3 3
0x8000 0 0 3 &mpc5200_pic 0 2 3
0x8000 0 0 4 &mpc5200_pic 0 1 3
>;
ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x00800000>;
bank-width = <4>;
device-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
partition@0 {
label = "DTS";
reg = <0x0 0x00100000>;
};
partition@100000 {
label = "Kernel";
reg = <0x100000 0x00200000>;
};
partition@300000 {
label = "RootFS";
reg = <0x00300000 0x00200000>;
};
partition@500000 {
label = "user";
reg = <0x00500000 0x00200000>;
};
partition@700000 {
label = "U-Boot";
reg = <0x00700000 0x00040000>;
};
partition@740000 {
label = "Env";
reg = <0x00740000 0x00020000>;
};
partition@760000 {
label = "red. Env";
reg = <0x00760000 0x00020000>;
};
partition@780000 {
label = "reserve";
reg = <0x00780000 0x00080000>;
};
};
simple100: gpio-controller-100@3,600100 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600100 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple104: gpio-controller-104@3,600104 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600104 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple200: gpio-controller-200@3,600200 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600200 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple201: gpio-controller-201@3,600201 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600201 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple202: gpio-controller-202@3,600202 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600202 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple203: gpio-controller-203@3,600203 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600203 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple204: gpio-controller-204@3,600204 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600204 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple206: gpio-controller-206@3,600206 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600206 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple207: gpio-controller-207@3,600207 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600207 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple20f: gpio-controller-20f@3,60020f {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x0060020f 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
|
