blob: 14de4e596f87b170661faad4cabe21deeb7019aa (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/* linux/include/asm-arm/arch-s3c2410/system.h
*
* Copyright (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - System function defines and includes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/map.h>
#include <asm/arch/idle.h>
#include <asm/arch/reset.h>
#include <asm/plat-s3c/regs-watchdog.h>
#include <asm/arch/regs-clock.h>
#include <linux/clk.h>
#include <linux/err.h>
void (*s3c24xx_idle)(void);
void (*s3c24xx_reset_hook)(void);
void s3c24xx_default_idle(void)
{
unsigned long tmp;
int i;
/* idle the system by using the idle mode which will wait for an
* interrupt to happen before restarting the system.
*/
/* Warning: going into idle state upsets jtag scanning */
__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
/* the samsung port seems to do a loop and then unset idle.. */
for (i = 0; i < 50; i++) {
tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
}
/* this bit is not cleared on re-start... */
__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
S3C2410_CLKCON);
}
static void arch_idle(void)
{
if (s3c24xx_idle != NULL)
(s3c24xx_idle)();
else
s3c24xx_default_idle();
}
static void
arch_reset(char mode)
{
struct clk *wdtclk;
if (mode == 's') {
cpu_reset(0);
}
if (s3c24xx_reset_hook)
s3c24xx_reset_hook();
printk("arch_reset: attempting watchdog reset\n");
__raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
wdtclk = clk_get(NULL, "watchdog");
if (!IS_ERR(wdtclk)) {
clk_enable(wdtclk);
} else
printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
/* put initial values into count and data */
__raw_writel(0x80, S3C2410_WTCNT);
__raw_writel(0x80, S3C2410_WTDAT);
/* set the watchdog to go and reset... */
__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
/* wait for reset to assert... */
mdelay(500);
printk(KERN_ERR "Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
}
|
