Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	Documentation/powerpc/booting-without-of.txt
	drivers/atm/Makefile
	drivers/net/fs_enet/fs_enet-main.c
	drivers/pci/pci-acpi.c
	net/8021q/vlan.c
	net/iucv/iucv.c

1 files changed, 0 insertions, 154 deletions

diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
deleted file mode 100644
index 08a6a779190..00000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP405H_H__
-#define __ASM_IBMNP405H_H__
-
-
-/* ibm405.h at bottom of this file */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x00000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_ADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_ADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_ADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_ADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	4
-
-#define UART0_INT	0
-#define UART1_INT	1
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define OPB0_BASE	0xEF600600
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base:(u8 *) UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(1)          \
-        STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_CHCR_BASE	0x0F1
-#define DCRN_CHPSR_BASE	0x0B4
-#define DCRN_CPMSR_BASE	0x0BA
-#define DCRN_CPMFR_BASE	0x0B9
-#define DCRN_CPMER_BASE	0x0B8
-
-/* CPM Clocking & Power Management defines */
-#define IBM_CPM_PCI		0x40000000	/* PCI */
-#define IBM_CPM_EMAC2	0x20000000	/* EMAC 2 MII */
-#define IBM_CPM_EMAC3	0x04000000	/* EMAC 3 MII */
-#define IBM_CPM_EMAC0	0x00800000	/* EMAC 0 MII */
-#define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
-#define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
-#define IBM_CPM_CPU	0x00008000	/* processor core */
-#define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
-#define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
-#define IBM_CPM_HDLC	0x00000800	/* HDCL */
-#define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
-#define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
-#define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
-#define IBM_CPM_DMA	0x00000040	/* DMA controller */
-#define IBM_CPM_IIC0	0x00000010	/* IIC interface */
-#define IBM_CPM_UART0	0x00000002	/* serial port 0 */
-#define IBM_CPM_UART1	0x00000001	/* serial port 1 */
-/* this is the default setting for devices put to sleep when booting */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU 	\
-			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB 	\
-			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
-			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2	\
-			| IBM_CPM_EMAC3 | IBM_CPM_PCI)
-
-#define DCRN_DMA0_BASE	0x100
-#define DCRN_DMA1_BASE	0x108
-#define DCRN_DMA2_BASE	0x110
-#define DCRN_DMA3_BASE	0x118
-#define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE	0x120
-#define DCRN_EBC_BASE	0x012
-#define DCRN_DCP0_BASE	0x014
-#define DCRN_MAL_BASE	0x180
-#define DCRN_OCM0_BASE	0x018
-#define DCRN_PLB0_BASE	0x084
-#define DCRN_PLLMR_BASE	0x0B0
-#define DCRN_POB0_BASE	0x0A0
-#define DCRN_SDRAM0_BASE 0x010
-#define DCRN_UIC0_BASE	0x0C0
-#define DCRN_UIC1_BASE	0x0D0
-#define DCRN_CPC0_EPRCSR 0x0F3
-
-#define UIC0_UIC1NC	0x00000002
-
-#define CHR1_CETE	0x00000004	/* CPU external timer enable */
-#define UIC0	DCRN_UIC0_BASE
-#define UIC1	DCRN_UIC1_BASE
-
-#undef NR_UICS
-#define NR_UICS	2
-
-/* EMAC DCRN's FIXME: armin */
-#define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP405H_H__ */
-#endif				/* __KERNEL__ */